
Field service resources
Commercial laundry error code library
Plain-English meanings for washer and dryer error codes from the brands we service, with what to check first and when to call a technician.
Browse by manufacturer

Speed Queen, Huebsch & UniMac
Front-load washer-extractors and hardmount washers with Quantum / Galaxy 400 & 600 controls, Quantum Gold and Quantum Touch, single and stack tumble dryers.
36 codes →
Dexter
T-Series and A-Series vended and OPL washer-extractors with VFD drives; T-30x2, T-50x2 and Express stack dryers.
33 codes →
Wascomat & Electrolux
Compass Pro and Compass Pro S washers and dryers, Clarus Vibe and older Clarus washers (W-series, EXSM, WDX), Selecta II dryers (T-series), Gen 5 and Gen 6 Emerald washers.
115 codes →
Continental Girbau
E-Series soft-mount washers with Logi, LogiPro and vended controls, HS-5008 and H2 Series hardmount washers.
33 codes →
Ipso
Ipso washer-extractors with Micro9 and Micro20 controls, including frequency-drive models.
16 codes →
Maytag Commercial
Maytag MAH-series and MXT commercial front-load washers, Maytag stack and single dryers, MFR washer-extractors.
44 codes →Before you call
1. Write down the code
- Note the exact code and when it shows up (fill, wash, spin, end of cycle).
- On drive-equipped washers, also note any code on the inverter display.
2. Check the easy things
- Door fully closed and latched
- Water valves open, hoses not kinked
- Drain and lint screen clear
- Load balanced, not one heavy item
3. Power-cycle once
- Turn power off for a few minutes (three on Dexter drives), then back on.
- If the code returns, stop and call. Repeated resets can damage the drive or motor.
Error code questions
What should I do when a commercial washer or dryer shows an error code?
Write down the exact code first, then check the simple causes: door fully closed, water turned on, drain clear, lint screen clean. Power-cycle the machine only after you have noted the code, because some drives clear their own fault history. If the code comes back, call a technician.
Do Speed Queen, Huebsch and UniMac use the same error codes?
Mostly yes. All three are built by Alliance Laundry Systems and use the same families of controls, so a code such as E dL (door lock) or E FL (fill) generally means the same thing on each brand.
Can I reset an error code myself?
Many codes clear when the problem is fixed and a new cycle is started, or after power is turned off for a few minutes. Resetting without fixing the cause usually brings the code back and can damage parts such as the drive or motor.
Does CLS repair the machines listed here?
Yes. Commercial Laundry Solutions services commercial washers and dryers from these manufacturers across New York City, Long Island, Westchester and the surrounding region. Calls are answered 24/7 at 718-439-1224.
These explanations are general guidance written by CLS from manufacturer service documentation, and code meanings can vary by control version. Always confirm with the manual for your exact model. Disconnect power (and gas or steam) before opening any panel. Repairs inside the machine should be done by a qualified technician.
Need it fixed today?
Factory-trained technicians across New York. Calls answered 24/7.