Skip to content
Calls answered 24/7Office Mon–Fri 8am–5pm
6717 4th Ave, Brooklyn, NY 11220718-439-1224
Commercial Laundry SolutionsNew York · Since 2001

Services

Everything your laundry equipment needs

Repair, preventive maintenance, dryer cleaning, installation and payment systems, handled by one factory-trained team.

Service

Repair & Emergency Service

A machine that is out of order earns nothing and frustrates customers. Our technicians diagnose and repair commercial washers and dryers quickly, on whatever schedule suits your operation.

  • Regular weekly service visits for busy stores
  • On-call service when you need us
  • Emergency dispatch, with calls answered 24/7
  • Field technicians carry the most common fast-moving parts on their service vehicles: belts, rollers, drain valves, sensors, door locks and more, so most repairs are finished on the first visit
  • Service history tracked machine by machine
Dryer wiring schematic with the heat circuit traced in color

Electrical troubleshooting, done by the schematic

CLS technicians are factory-trained to read electrical schematics and wiring diagrams. On electrical faults we follow the voltage through the machine with a meter and pinpoint the failed switch, relay, sensor or board, instead of swapping parts until something works.

How we troubleshoot washers and dryers →

Machine showing a code? Look it up in our error code library for Speed Queen, Huebsch, UniMac, Dexter, Wascomat, Electrolux, Continental Girbau, Ipso and Maytag.

Commercial dryer cabinet after a CLS PM cleaning, with sheet metal pieces closing off the cabinet cuts

Service

Preventive Maintenance (PM)

Planned maintenance catches worn parts before they turn into breakdowns, flooded floors or a dryer fire. We set a PM schedule for your washers and dryers and keep a record of every visit.

  • Inspection of bearings, seals, belts and suspension
  • Door lock, gasket and safety-circuit checks
  • Drain, water valve and hose inspection
  • Dryer burner, sensor and airflow checks
  • Written findings and recommended repairs after each visit

See our PM checklists and before-and-after photos →

Dryer plenum packed with lint before cleaning
Before
Dryer plenum after cleaning
After

Service

Dryer Cleaning

Lint builds up behind and above dryers where nobody sees it. It slows drying, wastes gas and is a leading cause of laundry fires. We clean the full airflow path, not just the lint screen.

  • Lint compartment and plenum cleaning
  • Exhaust duct and vent cleaning
  • Airflow and burner performance check afterward
  • Before-and-after photos for your records
  • One-time cleanings or a recurring schedule
CLS technician installing a new washer inside a laundromat

Service

Equipment Installation

Installation is the key to trouble-free operation. A washer that isn't mounted and leveled properly puts extra strain on its motor, bearings and belts. Our installation crews work in laundromats and laundry rooms across New York every day.

  • New stores, retools and single-machine replacements
  • Mounting, anchoring and leveling to manufacturer spec
  • Utilities and venting hookups
  • Removal and haul-away of old equipment
  • Start-up, testing and programming before opening day

Service

Onsite Bearing Replacement

Noisy spins, leaks at the back of the tub and a drum that rocks are signs of failing bearings. Our bearing crews handle washer and dryer bearing jobs right at your store. They arrive with the right tools and often with pre-assembled bearing housings, so the machine is back in service the same day whenever possible.

  • Washer bearing and seal replacement with SKF, NACHI and NTN bearings
  • Shafts, drum spiders, bearing housings and trunnions
  • Dryer drum bearings, trunnions and support rollers
  • Pre-assembled housings to cut time on site
  • Worn shafts reconditioned in our shop when possible
New anchor bolts set in a concrete platform after the washer was removed

Service

Rebolting & Reinstallation

A washer that shakes, walks or throws out-of-balance errors usually has loose or broken mounting bolts or a cracked base. That vibration wears out bearings, motors and the machines next to it. We pull the washer, repair the base, set new anchor bolts and reinstall it to manufacturer spec.

  • Washer removal from the platform or base
  • Broken and loose anchor bolt replacement
  • Concrete platform and grout repair
  • Reinstallation, leveling and torque to manufacturer spec
  • Test runs at full extract speed
LaundroWorks card reader on a washer and an ESD card reader

Service

Card & Payment Systems

We install and set up card readers, mobile-pay and coin systems on new and existing machines, for laundromats and apartment laundry rooms alike, and program pricing so every machine is ready for customers.

We work with LaundroWorks and ESD card and payment systems.

LaundroWorksESD payment systems
  • LaundroWorks and ESD card reader installation
  • Mobile-pay and app-pay setup
  • Conversions between coin and card
  • Pricing, cycle and vend programming
  • Troubleshooting readers and payment errors

Service

In-House Shop Repairs

Our Brooklyn shop is where the hard problems go. Our electronics bench diagnoses and repairs the parts that usually get replaced at full price: control boards, door locks, inverters and motor controls. Repairing a board or inverter often costs a fraction of a new one and gets your machine back in service faster.

  • Control board diagnostics and component-level repair
  • Door lock testing and repair
  • Inverter and motor control repair
  • Motor rebuilds
  • Shaft reconditioning and washer basket repair, including stainless welding
  • Parts sourcing for current and discontinued models
Illustration of a commercial washer with a high-pressure Turbo Wash spray system

Service

CLS Tuning Group

CLS TG is our elite team of technicians, each with a minimum of 15 years of experience. Their skill made possible the first, one-of-a-kind tuning shop for laundromat washers and dryers, where we upgrade equipment to run better, last longer, use less water and look better than it did from the factory.

Water saving

A 35 lb laundromat washer uses about 70 gallons per turn, or roughly 130,000 gallons a year at five turns a day. CLS TG water-saving tuning comes in three stages, about 18%, 35% or up to 55% savings, with the same cycle time and wash quality.

See all upgrades and water saving →

  • Water-saving tuning: about 18%, 35% or up to 55% less water
  • Turbo Wash spray system and sump removal or reduction
  • Electronic retrofit kits (ERK) to unlock features and custom cycles
  • Bearing core upgrades with ceramic bearings and special seals
  • Two-speed transmission for about 30% higher extract speed
  • Hot water overuse control, up to 15% less boiler energy

Machine down? We pick up 24/7.

Call any time to report a breakdown or book a visit. Our office schedules technicians Monday–Friday, 8am–5pm, with emergency dispatch when it can't wait.